Non-Clog Vertical and Horizontal Heavy Duty Pumps

Non-Clog Pump Overview

Non-Clog Vertical and Horizontal Heavy Duty Pumps
Non-Clog Vertical and Horizontal Heavy Duty Pumps

The Smart Turner Pumps Inc Non Clog Pump is designed to handle liquids such as sewage, sludge, pulp, stock, or food stuffs containing up to 3 inch or larger diameter solids. High efficiency and hydraulic stability allow application of each model with the appropriate bearing housing to ensure smooth, trouble free operation with the minimum of maintenance.

The centerline discharge feature makes old side discharge designs, with their need for left and right rotation arrangements, redundant. In the horizontal arrangement, the centerline discharge and full casing mount allow true back pullout with use of a spacer coupling.

Smart Turner Non Clog Pumps are produced in a range of 7 models, all of which are available in vertical frame mount drive, vertical flexible shaft drive or horizontal arrangements.

Depending on application, sizes are available to 12 x 10 x 19 for capacities to 6000 USGPM, heads to 250 ft, and speeds to 1800 Rpm.

Other Smart Turner Pump catalogues and products to meet your remaining pumping needs are outlined on the inside back cover.

Smart Turner Solution to Pumping Problems…

Whatever fluids you pump, Smart Turner has the background and technology to help you meet your needs effectively and efficiently with quality designed and built pumps. Smart Turner has established an enviable reputation for reliability while pumping chemicals, oil, beverages, slurries or sewage...almost any liquid known to man.

For over 100 years, Smart Turner has been dealing with and solving pumping problems throughout the world. This in-depth experience, coupled with modern computer technology at every level from concept to shipping, is available to you through our sales and engineering personnel, coast to coast.

At Smart Turner, pumps are our only business, designed through experience to provide consistent performance and minimum maintenance. A wide range of sizes and types allows us to match the right pump to your specific application.

For further information, or an evaluation or your pumping system requirements, contact your nearest Smart Turner sales office or distributor.

Non-Clog Vertical and Horizontal Heavy Duty Pump
Non-Clog Vertical and Horizontal Heavy Duty Pump
Non-Clog Vertical and Horizontal Heavy Duty Pump
Non-Clog Vertical and Horizontal Heavy Duty Pump
Impeller for Non-Clog Vertical and Horizontal Heavy Duty Pump
Impeller for Non-Clog Vertical and Horizontal Heavy Duty Pump

Non Clog Pump Specifications

Casing: A radially split, cast volute with separate suction cover, and 125/150 psi ANSI flat faced flanged connections, ruggedly designed with generous allowance for abrasion and corrosion.

Impeller: A one piece casting, the fully shrouded, enclosed impeller will handle solids of 3 inch diameter, or larger for some models. The impeller is machined, balanced and trimmed to meet the exact performance requirements, and the clearance between it and the suction cover is factory set. The impeller is keyed to the shaft and secured by a flow contoured washer and cap screw.

Wear Rings: Either or both, impeller and suction cover can be fitted with renewable, axial clearance wear rings.

Stuffing Box Cover: A heavy one piece casting with rabbeted flange for positive alignment. The deep bore will accept packing with a lantern ring, and single or double mechanical seals.

Gland: Split for packed stuffing boxes and solid for mechanical seals, the gland is provided in a variety of arrangements to suit the application.

Shaft: Precision machined high quality alloy, normally fitted with a renewable sleeve, the shaft is sized to minimize deflection to ensure smooth operation and maximum packing for seal life.

Bearings: The grease lubricated, antifriction bearings are generously sized for long life, and are protected from moisture and dirt by seals in both bearing covers.

Bearing Housing: The rigid cast iron bearing housing is located above the spigot fitted to the stuffing box cover. The bearing housing accepts a "C" flange motor for direct drive through a flexible coupling.

Suction Elbow: The pump suction is fitted with 125/150 psi ANSI flat faced flanged cast elbow.

Hand Holes: Suction elbow and casing are both provided with inspection or cleanout hand holes with fully flow contoured, bolted and gasketed covers.

Pump Stool: The entire pump is mounted on a substantial cast, four-legged stool capable of supporting the full weight and torque of the pump and motor.

Discharge: Centerline discharge nozzle means only one rotation is required. The discharge can be located at any one of eight positions.

Tests: All pumps are hydrostatically tested to 50 psi above the maximum casing design pressure.

Optional Equipment

Motor: A "C" flange electric motor can be provided.

Flexible Coupling: For normal duty our current standard is provided when a coupling is ordered. However, couplings of almost any style or manufacture can be accommodated.

Hose Valve: A bronze hose valve can be provided, fitted to the suction elbow.

Other Non Clog Pumps

A full range of open impeller, wet or dry pit Refuse Pumps is available for smaller stations and lower flow requirements. The Refuse Pump handles flows to 600 USGPM and heads to 100 ft.