Multi-Stage Heavy Duty Pumps
Smart Turner Pumps Inc Multi-Stage pumps are of a well proven, uncomplicated, Heavy-Duty design which provides high head, low NPSH performance in a compact, economical end suction style pump.
Smart Turner Multi-Stage pumps are designed to provide reliable low maintenance operation on a continuous high head, low NPSH service where trouble free performance is essential.
Smart Turner Multi-Stage pumps are ideally suited to a boiler feed or other arduous high performance service.
Smart Turner Multi-Stage pumps are produced in a range of 3 models, utilizing only one bearing housing assembly and thereby allowing maximum efficiency in terms of parts inventory and interchangeability.
Depending on the application and rating and rating, sizes are available to 4x2x10 for capacities to 400 USGPM, heads to 800 feet, speeds to 3600 Rpm.
Other smart Turner pump catalogues and products to meet your remaining pumping needs are outlined on the inside back cover.
- Cast Iron*
- Cast Iron, Bronze Fitted
- Cast Iron, 316 Stainless Fitted*
- Any other Alloy can be considered.
Smart Turner Solution to Pumping Problems…
Whatever fluids you pump, Smart Turner has the background and technology to help you meet your needs effectively and efficiently with quality designed and built pumps. Smart Turner has established an enviable reputation for reliability while pumping chemicals, oil, beverages, slurries or sewage…almost any liquid known to man.
For over 100 years, Smart Turner has been dealing with and solving pumping problems throughout the world. This in-depth experience, coupled with modern computer technology at every level from concept to shipping, is available to you through our sales and engineering personnel, coast to coast.
At Smart Turner, pumps are our only business, designed through experience to provide consistent performance and minimum maintenance. A wide range of sizes and types allows us to match the right pump to your specific application.
For further information, or an evaluation or your pumping system requirements, contact your nearest Smart Turner sales office or distributor.
Design and Construction Specifications
Casting: A radially split first stage volute with integral suction cover and 250 psi ANSI flat faced flanged suction connection. Foot mounting of the casting allows removal of the rotating assembly without disturbing the suction piping.
Impellers: The fully enclosed end suction impellers are both one piece castings, fully machined, trimmed to the exact diameter required for the application and factory balanced. The impellers are mounted back-to-back, keyed to the shaft, and are secured by a locknut and washer.
Stuffing Box Cover: A heavy one piece casting with an integral second stage volute and 250/800 psi ANSI flat faced flanged discharge connection. The deep stuffing box will accept a range of Packing or mechanical seals. The discharge connection is in the top centerline configuration.
InterStage Diaphragm: A solid casting precisely machined and fitted between the first and second stages. The diaphragm to casing and diaphragm to stuffing box seals are fully contained "O" Rings, except on the Model 1-1/2TC, which has Gasketed interfaces.
Gland: A split gland for packing, or solid for a mechanical seal, can be provided in a quench design if required.
Shaft: The precision machined high quality alloy shaft is normally fitted with a renewable sleeve, and is sized to minimize deflection to ensure smooth operation and maximum packing or seal life.
Shaft Sleeve: An easily removable stainless steel sleeve is standard. The sleeve is sealed against the shaft by "O" Rings and is secured by double locking screws. Hardened Sleeves available on request.
Bearing: Standard grease lubricated ball bearings are rated for 2 years minimum service at full load and speed. Oil lubrication, with or without cooling, is available.
Bearing Housing: A rigid casting precision machined to ensure accurate bore and rotating element alignment.
Adaptor: A rigid casting with an integral gland drip reservoir, precision machined to connect the bearing housing to the liquid end of the pump.
Hydraulic Balance: Back-to-back impellers ensure full axial balance while 180 degree opposed cutwaters provide effective radial balance.
Temperature: Standard packing or mechanical seal, and grease lubricated bearings are satisfactory to 250 degrees Fahrenheit on water, depending on additives and operating conditions. Optional seals or packing, quench glands and oil lubrication with or without cooling, are available for higher temperatures.
Interchangeability: All pumps utilize a common bearing housing and have interchangeable bearings, Packing, seals, glands, and hardware, resulting in efficient parts inventory at the factory for the customer.
Tests: All pumps are hydrostatically tested to 100 psi above the maximum design pressure.
Base: A rigid channel or fabricated base can be provided to our standard for electric motor drives. Special bases can be provided and can incorporate grout holes, drip rims, and other features.
Guard: A coupling guard to our standard can be mounted on the baseplate. Special guards can be accommodated. Flexible Coupling: For normal duty, our current standard is provided when a coupling is ordered. However, couplings of almost any style or manufacture can be accommodated.
Motors: An electric motor or other driver can be provided.
Wear Rings: Casings and impellers can be provided with wear rings. However, there are not recommended except for special applications or circumstances.
Other Multi-Stage Pumps
Smart Turner horizontally split case Multi-Stage pumps are available in the standard Double Suction Catalogue C-90.